Products :: Turntable System :: TN-400S

TN-400S - Belt-driven Turntable with S-shaped Tone Arm

TN-400S SPECIFICATIONS

Turntable section  
Drive System Belt Drive
Motor DC Motor
Speed 33 1/3 RPM, 45 RPM, 78 RPM
Rotation Speed Variation +/–2%
Wow and Flutter 0.2%
Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter Aluminum Die-cast
Diameter of Platter 12", 30cm
Tonearm section  
Type Static Balanced, S-shaped
Effective Arm Length 8.8", 223mm
Stylus Pressure Range 0 to 5g
Supported Cartridge Weight 3.5 to 6.7g
13.5 to 16.5g (including head shell) 
Anti-skating Adjustment Supported
Cartridge section  
Type MM type (audio-technica AT100E factory installed)
Stylus Shape Joint-oval 0.3 x 0.7 mil
Stylus Construction Bonded Round Shank
Mount Half inch
Frequency Response 20Hz to 20kHz
Channel Separation 27dB at 1kHz
Output Balance 1.5dB
Needle Pressure 1.0 to 1.8g (approximate value 1.4g)
Vertical Tracking Angle 23 degrees
Supported Load Impedance 47k ohms
Output Voltage 4.5mV (1kHz, 5cm/sec.)
Cartridge Weight 6.5g 
Replacement Stylus audio-technica AT100E
Phono Equalizer Amplifier  
Type of Amplifier MM type (On/Thru switchable)
Analog Output  
Connector RCA Pin jack (Gold-plated)
Output Voltage Phono/Line switchable
Phono Output 4.5mV (± 3dB)
Line Output 230mV (–13dBV)
USB Output section  
Connector USB B type
Output Signal PCM 48kHz/16-bit
Supported OS Windows 7
Windows 8
Windows 8.1
Windows 10
OS X Lion (10.7)
OS X Mountain Lion (10.8)
OS X Mavericks (10.9)
OS X Yosemite (10.10)
OS X El Capitan (10.11)
macOS Sierra (10.12)
Power AC 100 to 240V, 50/60Hz
Power Consumption 1.5W (less than 0.5W at Standby)
Overall Dimensions
(W x H x D)
16.5" x 4.6" x 14.0"
420 x 117 x 356 mm
Weight  Approx. 10.8 lbs.  4.9 kg
Accessories Felt Mat, EP Adapter, Counter Weight, Head-shell (audio-technica AT100E equivalent installed), Turntable(Platter), Dust Cover, Dust Cover Hinges, RCA Audio Cable with GND wiring, AC Adapter (GPE053A-V120050-Z), Owner’s Manual (including Warranty Card)

※ RoHS complied.
※ Specification and design may subject to change.